1. Open url http://192.168.1.1 in browser.
2. Login using your airtel modem's username and password. Default login and password are admin and password.
3. Click on link Advanced Setup --> WAN in the left side menu.
4. You'll have options to add or remove configurations.
5. On the right screen, you see a single service listed called PPPoE. Click on Edit.
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next.
7. Select connection type: MAC Encapsulation Routing and encapsulation type: LLC/Snap Bridging and click next.
8. Enter the IP address, subnet mask, and default gateway information that your ISP should have given you then click next.
9. Check Enable NAT, Firewall(If you want), WAN Service Option & Enter the Service Name.
10. Click Next and Save.
11. Now you will be back to the first screen with the service listed as bridge. Click on Save/Reboot. This will reboot your modem. Wait for 2 mins for complete reboot to happen.
12. This completes the configuration for the modem.
13. Finally configure your system as above said (Computer is connected directly to the internet without any router or firewall).
No comments:
Post a Comment