1. Open url http://192.168.1.1 in browser.
2. Login using your airtel modem's username and password. Default login and password are admin and password.
3. Click on link Advanced Setup --> NAT --> Virtual Servers in the left side menu.
4. There u will see two options: Add and Remove.
5. Click on Add.
6. In the 'Server Name', choose 'Custom Server', and give it any name you like...
7. In 'Server IP Address', put your ip address...(to find your ip address, open command prompt, and type ipconfig)
8. In 'external port', enter the port you want to open... If you want to open just one port or range of port by using “:”. Example 1100:1105.
9. In ‘internal port', enter the port you want to open... If you want to open just one port or range of port by using “:”. Example 1100:1105.
10. Now, click on save/apply, and you are done.
Showing posts with label Beetel Modem. Show all posts
Showing posts with label Beetel Modem. Show all posts
Thursday, November 13, 2008
Configure Beetel Modem in MAC Encapsulation Routing
1. Open url http://192.168.1.1 in browser.
2. Login using your airtel modem's username and password. Default login and password are admin and password.
3. Click on link Advanced Setup --> WAN in the left side menu.
4. You'll have options to add or remove configurations.
5. On the right screen, you see a single service listed called PPPoE. Click on Edit.
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next.
7. Select connection type: MAC Encapsulation Routing and encapsulation type: LLC/Snap Bridging and click next.
8. Enter the IP address, subnet mask, and default gateway information that your ISP should have given you then click next.
9. Check Enable NAT, Firewall(If you want), WAN Service Option & Enter the Service Name.
10. Click Next and Save.
11. Now you will be back to the first screen with the service listed as bridge. Click on Save/Reboot. This will reboot your modem. Wait for 2 mins for complete reboot to happen.
12. This completes the configuration for the modem.
13. Finally configure your system as above said (Computer is connected directly to the internet without any router or firewall).
2. Login using your airtel modem's username and password. Default login and password are admin and password.
3. Click on link Advanced Setup --> WAN in the left side menu.
4. You'll have options to add or remove configurations.
5. On the right screen, you see a single service listed called PPPoE. Click on Edit.
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next.
7. Select connection type: MAC Encapsulation Routing and encapsulation type: LLC/Snap Bridging and click next.
8. Enter the IP address, subnet mask, and default gateway information that your ISP should have given you then click next.
9. Check Enable NAT, Firewall(If you want), WAN Service Option & Enter the Service Name.
10. Click Next and Save.
11. Now you will be back to the first screen with the service listed as bridge. Click on Save/Reboot. This will reboot your modem. Wait for 2 mins for complete reboot to happen.
12. This completes the configuration for the modem.
13. Finally configure your system as above said (Computer is connected directly to the internet without any router or firewall).
Configure Beetel Modem in Bridging Mode
Computer is connected to the internet with a router or a firewall or a modem:
1. Open url http://192.168.1.1 in browser.
2. Login using your airtel modem's username and password. Default login and password are admin and password.
3. Click on link Advanced Setup --> WAN in the left side menu.
4. You'll have options to add or remove configurations.
5. On the right screen, you see a single service listed called PPPoE. Click on Edit.
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next.
7. Select connection type: Bridging and encapsulation type: LLC/Snap Bridging and click next.
8. Check Enable Bridge Service Option & Enter the Service Name.
9. Click Next and Save.
10. Now you will be back to the first screen with the service listed as bridge. Click on Save/Reboot. This will reboot your modem. Wait for 2 mins for complete reboot to happen.
11. This completes the configuration for the modem.
12. Finally configure your system as above said (Computer is connected directly to the internet without any router or firewall).
1. Open url http://192.168.1.1 in browser.
2. Login using your airtel modem's username and password. Default login and password are admin and password.
3. Click on link Advanced Setup --> WAN in the left side menu.
4. You'll have options to add or remove configurations.
5. On the right screen, you see a single service listed called PPPoE. Click on Edit.
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next.
7. Select connection type: Bridging and encapsulation type: LLC/Snap Bridging and click next.
8. Check Enable Bridge Service Option & Enter the Service Name.
9. Click Next and Save.
10. Now you will be back to the first screen with the service listed as bridge. Click on Save/Reboot. This will reboot your modem. Wait for 2 mins for complete reboot to happen.
11. This completes the configuration for the modem.
12. Finally configure your system as above said (Computer is connected directly to the internet without any router or firewall).
Subscribe to:
Posts (Atom)